DF-611 on C550 with ADF jams

[laserman06]

After I did the screws on mine, working like a charm. Have not been back. Crossing my fingers

[Haroldbfix]

One of the DF-611's I was having a jam 6602/6603 problem had the shims installed and a white LEVER so I can only conclude they don't work.
But after put the 2 screws and lowering the sep roller pressure spring to the lowest position the problem was solved.

I agree had same issue did the same thing and problem was resolved. Prior to this the customer wanted to throw the machine and tech out the window.

[excanonguy]

I guess this is still an ongoing issue...I have had two very recent installs of DF-611 's and they are both having the same 6603 codes, and they have the mods done on them from the factory, I lowered the spring pressure(lowest notch) on one and tested for quite a while and it didnt jam....but I am sure this will be back lol! Do any of you guys have any solutions of your own that have helped??

[JSC]

And i thought it was only me having these problems with DF611's
I have also found that replacing the DF611 feed roller ( same roller as the paper feed on the C250's ) with the C550 paper feed tyre ( the pink ones ) also helps.

[excanonguy]

And i thought it was only me having these problems with DF611's
I have also found that replacing the DF611 feed roller ( same roller as the paper feed on the C250's ) with the C550 paper feed tyre ( the pink ones ) also helps.

Do you have a part number for it,so I can check if its the same here in North America?

Thanks Steve

[JSC]

Do you have a part number for it,so I can check if its the same here in North America?

Thanks Steve

A00J563600