C451 Transfer Belt Drive Problem

[tehrancopy.com]

Change the Transfer Cleaning Motor . The motor shaft sometimes get worn out and it will cause damage to the gears .


WWW.tehrancopy.com

[matsan_offset@yahoo.com]

Client complained of clicking/grinding sound and found that the Transfer Belt drive gear cluster was not staying engaged on exit side of belt area. We replaced that gear cluster and complete belt assembly and now it has come back again.

Any ideas why?

Thanks all!

Hello, has your problem been solved? I have the same problem as yours.

[Phil B.]

Hello, has your problem been solved? I have the same problem as yours.

did you read any posts past Mr Fuser's original post?