Develop Ineo +3100p

[deanb]

hi guys,

I have been setting one of these small develop printers up in the workshop and can not get into service mode i hope someone out there can help me.
I have tried all the normall ones i.e 12345678,92729272,87654321,

i found the manual online but does not give any anwsers.

Thanks,

Dean

[MDR24]

You got it right with 9272...

We dont have any of these machines out however the likes of the +3350 and +3110 require a reset procedure or for you to reboot the machine after a certain amount of incorrect attempts, maybe this is the same?

Are you calling the password screen up correctly? By pressing menu/select-->down--> ....etc...


It's on page 132 of 335 (I-9) of the service manual.