Results 1 to 10 of 10
  1. #1
    Senior Tech 100+ Posts Jhonjon's Avatar
    Join Date
    Sep 2013
    Location
    Penang
    Posts
    205
    Rep Power
    24

    Printing problem.

    Hi, guys need help in Minolta Bizhub 284e. The machine is newly installed more than a week but 2 days ago the user complain that the machine is not printing if the machine is in power save mode/sleep mode. They need to turn off and on the machine before the machine print the document. Yesterday i visit the location with the latest firmware but still the same problem. I'm new in KM machines, Any suggestion, thanks' in advance.

  2. #2
    Trusted Tech 50+ Posts service_man's Avatar
    Join Date
    Jul 2012
    Location
    Mostar
    Posts
    59
    Rep Power
    0

    Re: Printing problem.

    First, try to change FW for SSD, I think that is GD1-A9. Try to find on Infohub.

    If your problem is not resolved, change SSD Board, and put new FW G20-K1

    I have the same problem, and I repair machine.

    Regards

  3. #3
    Service Manager 1,000+ Posts kingarthur's Avatar
    Join Date
    Feb 2008
    Posts
    1,107
    Rep Power
    55

    Re: Printing problem.

    think it's caused by power save settings, go to admin, system settings, power save settings, enter power save mode, change from "immediately" to "normal" then go to 2/2 change power consumption in sleep mode from "enabled" to "disabled"

    seem to remember there was a bulletin
    Tip for the day; Treat every problem as your dog would.....If you cant eat it or f*ck it....then p*ss on it & walk away...

  4. #4
    Senior Tech 100+ Posts Jhonjon's Avatar
    Join Date
    Sep 2013
    Location
    Penang
    Posts
    205
    Rep Power
    24

    Re: Printing problem.

    Thanks for the input gentlemen i will visit the location on Monday & I'll update you then...

  5. #5
    Senior Tech 100+ Posts
    Printing problem.

    copyrooks's Avatar
    Join Date
    Oct 2013
    Posts
    200
    Rep Power
    30

    Re: Printing problem.

    Get rid of that weekly timer settings too.

  6. #6
    Certified Konica Expert 2,500+ Posts
    Printing problem.

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,943
    Rep Power
    216

    Re: Printing problem.

    In tech rep mode you can enable disable sleep.
    Then in admin mode turn sleep off.
    I have replaced about 7 or 8 SSD boards and mfps to stop this issue.
    Good luck.

  7. #7
    Master Of The Obvious 10,000+ Posts
    Printing problem.

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: Printing problem.

    Firmware GD1-K9 purports to fix this issue. Give it a try. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  8. #8
    Service Manager 5,000+ Posts
    Printing problem.

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: Printing problem.

    kingarther above is correct, seen this a few times, there was a bulletin
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  9. #9
    Service Manager 1,000+ Posts
    Join Date
    Sep 2012
    Posts
    1,129
    Rep Power
    39

    Re: Printing problem.

    I also go to service mode to enable the setting to turn off sleep mode. Then in admin setting turn off sleep mode so that now it only goes into low power mode. Set immediate to normal. Also definitely turn off weekly timer.

    Sent from my XT1254 using Tapatalk

  10. #10
    Senior Tech 100+ Posts Jhonjon's Avatar
    Join Date
    Sep 2013
    Location
    Penang
    Posts
    205
    Rep Power
    24

    Re: Printing problem.

    Gentlemen, I visited last Monday the customer adjust the "power save settings" and "power save mode"... Today I call the user, and He said that the machine is working fine since Monday.

    Thanks for the help...

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here