Results 1 to 8 of 8

Thread: FS-535 J72-13

  1. #1
    Technician
    Join Date
    Mar 2015
    Posts
    11
    Rep Power
    19

    FS-535 J72-13

    FS-535 running on a C754e

    Random jams occurring with a J72-13 code and paper always stops in the same spot. It seems to be getting caught on just the center tooth of the gate that is called part /5 in the paper transport section of the parts manual.


    It will only do this when the paper runs long side first but short side first it will never miss a beat.

    Thank you for your help in advance!

  2. #2
    Technician
    Join Date
    Mar 2015
    Posts
    11
    Rep Power
    19

    Re: FS-535 J72-13

    I apologize I meant the part in the parts manual is listed as "Part /2" in the parts manual...

  3. #3
    Certified Konica Expert 2,500+ Posts
    FS-535 J72-13

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,914
    Rep Power
    216

    Re: FS-535 J72-13

    seen this a dozen times, the spring broke on the solenoid that controls the gate.
    i attached the bulletin and i will tell ya, if you have 2 spring hook tools you can just change the pintle and spring and leave the solenoid screwed in. sooo much easier. also pop the whole top off the finisher to get access.


    7213 jams.pdf

  4. #4
    Senior Tech 100+ Posts
    Join Date
    Jul 2014
    Location
    USA
    Posts
    204
    Rep Power
    23

    Re: FS-535 J72-13

    I use a spring hook and an extendable magnet to guide it into place haha. forget taking all that stuff off.

  5. #5
    Certified Konica Expert 2,500+ Posts
    FS-535 J72-13

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,914
    Rep Power
    216

    Re: FS-535 J72-13

    Quote Originally Posted by splblazer91 View Post
    I use a spring hook and an extendable magnet to guide it into place haha. forget taking all that stuff off.
    do you hum the theme song from Mission Impossible while replacing it too?

  6. #6
    Technician
    Join Date
    Jun 2016
    Location
    Bay Area, CA
    Posts
    18
    Rep Power
    16

    Re: FS-535 J72-13

    I know that this is an old thread, but I stumbled across it. That bulletin is for 72-19, that applies to 72-13 as well?

  7. #7
    Super Tech 500+ Posts CompyTech's Avatar
    Join Date
    Feb 2011
    Location
    MS
    Posts
    706
    Rep Power
    36

    Re: FS-535 J72-13

    Quote Originally Posted by Rikk811 View Post
    I know that this is an old thread, but I stumbled across it. That bulletin is for 72-19, that applies to 72-13 as well?
    72-13 shows the Zfold entrance sensor as the area. Check the solenoid springs anyways, cause even if they're the updated spring they can still fall off the gate.

  8. #8
    Senior Tech 100+ Posts
    FS-535 J72-13

    MVPunisher's Avatar
    Join Date
    May 2013
    Location
    hudson falls
    Posts
    207
    Rep Power
    26

    Re: FS-535 J72-13

    What did you ever establish with this machine? All springs and gates seem to be in tact and operating as normal....

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here