Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Field Supervisor 500+ Posts
    Join Date
    Feb 2008
    Location
    Mechanicsburg, PA
    Posts
    906
    Rep Power
    32

    Red face Bizhub C450 error code C-B003

    Does anyone know what the error code C-B003 on a konica minolta bizhub c450 is for? I think it might have to do with a fax unit installation error but I'm not sure.

    Anyone know how to fix or reset it and enter service mode?

    Thanks.
    PK



  2. #2
    Senior Tech 250+ Posts
    Bizhub C450 error code C-B003

    mitchl's Avatar
    Join Date
    Apr 2007
    Location
    Tampa
    Posts
    475
    Rep Power
    27
    The code is a fax board error, try resetting the board in the machine. Real simple loosen the 2 thumb screws and pull it out and re seat it. If that doesn't work go to service mode, hit the utility key then select detail on the left bottom of the screen then hit.... stop-00-stop-01 Go to system 1- Initialization and select system error clear. If that doesn't get it going you might want to try reloading the firmware and/or replacing the fax board.


  3. #3
    Junior Member
    Join Date
    Dec 2009
    Posts
    6
    Rep Power
    0

    KonicaMinolta C450 code C-FB54 ??


  4. #4
    Trusted Tech 50+ Posts alexfixes's Avatar
    Join Date
    Jan 2010
    Posts
    68
    Rep Power
    0

    Smile c-B003

    Quote Originally Posted by kingpd@businessprints.net View Post
    Does anyone know what the error code C-B003 on a konica minolta bizhub c450 is for? I think it might have to do with a fax unit installation error but I'm not sure.

    Anyone know how to fix or reset it and enter service mode?

    Thanks.
    PK
    hi there from CA, this error usally is caused when installed PWB-pci board and is giving you this erroe refers to canot send/recieve faxes. you can reset the code and power off/on should clear the faxes.by unpluging the fax line and clear all fax jobs will also fix this problem.
    good luck


  5. #5
    Trusted Tech 50+ Posts alexfixes's Avatar
    Join Date
    Jan 2010
    Posts
    68
    Rep Power
    0

    fax baord

    Quote Originally Posted by mitchl View Post
    The code is a fax board error, try resetting the board in the machine. Real simple loosen the 2 thumb screws and pull it out and re seat it. If that doesn't work go to service mode, hit the utility key then select detail on the left bottom of the screen then hit.... stop-00-stop-01 Go to system 1- Initialization and select system error clear. If that doesn't get it going you might want to try reloading the firmware and/or replacing the fax board.
    hi there, you are correct, I aslo recomended that reset and clear,possibly rseting fax baord and also PWB-pci when is installed it will comes with this error.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •