C224e 99-03, 99-03

[DijanJanssen]

C224e with 99-02 error, and C99-03 during Imaging Procces Adjustment.

Start button flashing spontaneously blue/red while test print and gives than 99-02.

Feed test all drawers without text is good, when text is on then gives machine during print 99-02 ?
Sensor test are OK

Parts that replace/switched:
Powersupply
Laser unit
High voltage
Board PWB Assembly
Drum units

No solution

Anyone have any suggesties?

[copier addict]

Have you tried updating the firmware?

[DijanJanssen]

Have you tried updating the firmware?

Yes firmware update gives no improvement

[habik]

Pcl and ps font prints OK?

Byting on bits.

[habik]

What ver fw did youload and what ver is on ssw25?

Byting on bits.

[DijanJanssen]

Soft 25= 60
Firmware= GD2-K9 (new 10-6-2016)

I am now going to create a log file, see if we may see an error?

[habik]

I've got 2 m\c next to each other both were on G20-K7. I am flashing one with GD2-K9 as I am typing so can compare if issue arrises.

Byting on bits.

[avecosat]

I`ve got 2 or 3 machine with this firmware and don`t have problem , SSD version??

[habik]

No issue so far.

Byting on bits.

[Albonline]

we've run into this a few times and its usually ssd or hdd