Biz hub C280 dark prints

[coveredinoil]

Hi
I have a Konica Minolta Bizhub C280 which is printing darker than it
should.
If I take a photo it looks good on the camera, my laptop(XP) and my
Mac (el capitan) but if I print from LT, Mac or event from a usb stick (plugged
in printer) the Image is much darker than I would expect to see.
Can anyone help me with this?
Thanks

[minimerlin]

Hi
I have a Konica Minolta Bizhub C280 which is printing darker than it
should.
If I take a photo it looks good on the camera, my laptop(XP) and my
Mac (el capitan) but if I print from LT, Mac or event from a usb stick (plugged
in printer) the Image is much darker than I would expect to see.
Can anyone help me with this?
Thanks

This does not give us much to work on! What is the counts on the Drums, Dev units etc? When was it last serviced? Have you called a Tech or just want us to diagnose it for free? What are the internal test prints like? Are you an end user?
Sorry to be negative but without knowing all the facts, and seeing the output, it is impossible to say what your problem is!

[allan]

Just before the developer runs out the prints gets to dark due to the fact that the machine will add the same amount off toner regardless of the amount of developer.

[coveredinoil]

Sorry, let's try and answer some of the questions raised.
IMG_7529.jpgIMG_7528.jpg
Hope that answers the usage bit.
Not sure when it was last serviced, i inherited it along with a very small business.
I have not called a tech YET and i DON'T want it diagnosed for free, just a few pointers if there is anything simple i should check or look out for first. My business is really up against the wall (along with main others I hear you call)
The internal test print looks ok (to me!)
Yes I'm the end user.
Thanks for any help

[Synthohol]

Try hitting utility, administrator mode, 12345678, locate expert adjustment and run gradations 3 times for each catagory.
Gradations are the machines color calibration. If you have a users manual this is covered.

[gerryproulx]

agreed do the gradations first and you can try a different driver

[allan]

Sorry, let's try and answer some of the questions raised.
IMG_7529.jpgIMG_7528.jpg
Hope that answers the usage bit.
Not sure when it was last serviced, i inherited it along with a very small business.
I have not called a tech YET and i DON'T want it diagnosed for free, just a few pointers if there is anything simple i should check or look out for first. My business is really up against the wall (along with main others I hear you call)
The internal test print looks ok (to me!)
Yes I'm the end user.
Thanks for any help

What is the total meter count?

[coveredinoil]

What is the total meter count?

Total = 239733
Colour = 79280
Black = 160453

(Will try graduation shortly and will report back)

[tech51]

In the print driver there are settings for different applications such as cad,photo etc.
After setting up the gradation as previously suggested, I would play with the settings.

[coveredinoil]

Try hitting utility, administrator mode, 12345678, locate expert adjustment and run gradations 3 times for each catagory.
Gradations are the machines color calibration. If you have a users manual this is covered.

Wow, that's so much better. I had run gradation once before, but just the once!
One last question(I hope), blue looks a little washed out (not much, i can live with it if needs be) but would running through "Application - Edit Colour - Colour Adjustment" help? or is that just for the copy function?
Thanks again.