I have a cracked gear on a FS 534 finisher causing a C1144 error. If anyone can send me the FS 534 parts manual I can trade for Sharp, Ricoh, Konica, Panasonic.
Thanks
Thanks: 0
Likes: 0
Dislikes: 0
I have a cracked gear on a FS 534 finisher causing a C1144 error. If anyone can send me the FS 534 parts manual I can trade for Sharp, Ricoh, Konica, Panasonic.
Thanks
complete eject drive unit A3EPPPDE00
Thanks,Originally Posted by EarthKmTech
I was able to get the gear, but getting the drive unit out is causing me some problems. The gear (a pulley actually) was over $100, I cant imagine what the whole drive unit would cost.
complete eject drive unit A3EPPPDE00
@292. cdn dollars fyi
and I replaced this part as per the bulletin and it did not fix my problem....still working on it
The only thing I've ever seen fail on the eject section is the timing wheel: A3EPPP7402
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Posting Permissions
Reply With Quote
Bookmarks