Thanks:
0
Likes:
0
Dislikes:
0
-
Conservative in Exile
250+ Posts
- Rep Power
- 37
C500 intermittent j72-29
I have a C500 with intermittent J72-29 codes. Any suggestions.
The family that prays together, stays together!
Smile God created you and He doesn't make mistakes!
Relax, God IS in control!
Be still and know that I am God
Ps 46:10
-
Senior Tech
100+ Posts
- Rep Power
- 36
I just had this problem. The connector wiring to the exit sensor was making intermittent contact. I found this when I pull the connector off to check the sensor and the wire cut. I found another 3-pin connector and spliced it into the wiring harness.
-
Junior Member
- Rep Power
- 0
Hi,
Ive also had like that problem to, the wiring loom is to short there is a mod for it, a longer wiring loom.
Also had a problem with intermittent jams with that code also and it was due to the solenoid beside the anticurl roller,the wire to the solenoid was damaged,replaced solenoid and it worked.
-
-
Curmudgeon at large
100+ Posts
- Rep Power
- 36
I had this same issue on a 7255. I had a good harness to use w/o splicing.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks