No word from the returned ADF..... that is a good sign !! Thanks To All !!!
Installed 2 new DF-628 feeders recently..... the paper present actuator NOW has a magnet in the actuator near the shaft of the roller assembly giving it more weight, and the effect of magnetism as well.
Congratulations! Thanks for posting back. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Originally Posted by CraigW
Yes, and these magnets fall out and stick to the shaft...as previously posted
Tip for the day; Treat every problem as your dog would.....If you cant eat it or f*ck it....then p*ss on it & walk away...
Hey how are ya!
I've seen the actuator hang up inside the grove of the cover, try tapping the actuator continuously and see if it gets hung up in the opening, The other issue I've seen is the scan speed is to fast and get false takeups, we set a couple of settings like compact pdf and dpi to normal. you can see the speed slow down and improve takeup! We have alot of clients that scan alot and this df621 is notorious. Just an Fyi
The 621's we modded here are working great , running at top speed for scans.
Posting Permissions
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks