are you plugged into the correct service port?
is the stick formatted fat32?
are you plugged into the correct service port?
is the stick formatted fat32?
Yes and Yes thought there was only 1 service port (remove the screw and lift the flap)
is there any other routines like leave the door open in service manual it states close door within 3 seconds of switching on
have noticed when doing movie data this memory stick is not always recognised
will get a new usb and try again
I Used To Live To Fix Things Now i Fix Things To Live
Movie data gets installed through the front ctl panel usb not the service port
All sorted
was just the usb stick it didnt like
Got a new usb stick 1g
ran reset tool as per bulletin
password now reset to default
Last edited by Elmo; 08-25-2016 at 03:46 PM.
I Used To Live To Fix Things Now i Fix Things To Live
Fat32? It cant use USB3 but if its only 2GB im guessings it USB2
Sent from my SM-G900I using Tapatalk
Is that tool only for c224 and not c224e. KM tech support never mentioned a reset tool when i gad trouble
Sent from my SM-G900I using Tapatalk
its the same tool for all colour
I Used To Live To Fix Things Now i Fix Things To Live
I guess benifit of KMs actual pass reset is its much easier
Sent from my SM-G900I using Tapatalk
Hola fijate que tengo el mismo problema, tengo bloqueado EL SERVICE MODE, pero tambien tengo un CE04, pero no tengo el reset tool para reiniciar... tu tienes este software?? que me puedas apoyar, es que tengo 2 meses intentando con esta maqina pero tenia otros errores y no puedo sacar el codigo Token para que KM me de el otro codigo para reiniciarla.
Espero tu ayuda
Bookmarks