Disable the 3 sheet auto calibration on KM C6000

[madsk]

I'm using a KM C6000 and I need to find the setting where I can disable the function that outputs the 3 calibrations sheets in the beginning of a job.
I'm trying to print black on some gold foil paper, but the calibration that it does keeps stopping the machine, since it can't read the calibration on the blank gold paper.

I simply cannot find the function to disable it while I'm trying to complete this job.

[Synthohol]

what 3 calibration pages? never heard of this.
can you scan them and post?

[madsk]

what 3 calibration pages? never heard of this.
can you scan them and post?

Yes I've scanned and attached it below.

[Synthohol]

What controller is on it?

[madsk]

What controller is on it?

Not really sure - I'm not used to Konica machines - how do I check this?

[Synthohol]

On any computer that prints to it you can look at the printer properties under advanced and tell me what driver is listed or touch controller on the screen and print a config page.

[mx6turbo89]

Turn off Color Density Control in the C6000.

[andyf424]

It's part of the ru-509 color density sensor. i forgot how to shut that off. I'll look in to it later but check the manual for ru-509 color density and you should find it.