Email on Direct Input missing. E series with Pagescope Enterprise

[wseyller]

Glad I was able to help. I am not sure how it changed either because none of our guys would even mess with that setting I'm sure. I'm thinking PSES or something somehow made the change during integration.

I basically exported the management list to usb. I compared it to the same model at the customers site without the issue. Both had identical soft switches. There were two admin settings that were different between the two copiers that were in the ballpark in relation to the issue.

Sent from my Nexus 6P using Tapatalk

[guycampo]

I had this problem and this is the definite fix.Most likely in the deployment guide used to configure the machine a setting in Admin Mode is turned on. Follow these steps:
Utility/Counter –> 3 – Administrator Settings –> 0 –Security Settings ->
4th Section Down -> Select “Manual Destination Input”
Select -> Allow All