Trouble code 9401....replaced CCD..code gone,but 3/4 copy black.Any I can do...firmware updated
Sent from my SM-N920V using Tapatalk
Thanks: 0
Likes: 0
Dislikes: 0
Trouble code 9401....replaced CCD..code gone,but 3/4 copy black.Any I can do...firmware updated
Sent from my SM-N920V using Tapatalk
Have a look.
Better to search the site this way.
https://www.google.com/search?sclien...oj=1&gfe_rd=cr
Whatever
I'm thinking that you turned the wrong screws when installing the CCD. The painted screws are to focus the CCD, and most likely you changed that focus. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
We have had some faulty out of the box CCD's lately.
Last one had about 1/2 inch skew off the glass on install, the original faulty was put back in and perfect but S-1. (probably dropped in transit)
replaced with another new one, no more problems.
bizhub 423 Focus
Does it look like this?:
bizhub 423 scanner focus.jpg
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Yes same thing!Originally Posted by EarthKmTech
Sent from my SM-N920V using Tapatalk
Posting Permissions
Reply With Quote
Bookmarks