Dear friends,
I have recently received files for firmware update and animation guide.
How can I install them using USB flash?
btw I have access to service mode .
thanks in advance.
Dear friends,
I have recently received files for firmware update and animation guide.
How can I install them using USB flash?
btw I have access to service mode .
thanks in advance.
fw goes on root of drive and booted from the service port.
movie data system 2 install data. front panel USB.
power off machine.
expand the firmware and put it in the root of the thumb drive.
install the thumb drive in the service usb port on back of machine.
turn on machine.
follow on screen prompts.
after this completes remove thumb drive and power cycle machine
next put animation movie file on thumb drive
put thumb drive in front usb port
go into service mode > system 2 (possible 1)
go to load data select animation
hit next (or ok) and wait and wait and wait some more.
when done remove thumb drive and exit service mode.
This is from my bad memory and some prompts may have changed.
And Star Trek was just a tv show...yeah right!
Machine Off >> usb in service port >> machine ON >> wait until you get firmware update screen >> start or do nothing >> wait until all is updated >> SWITCH MACHINE OFF >> now unplug from service port
The rest as above.
Sent from my iDon't believe in marketing device using Tapatalk
Firmwares HERE.OK Google! ... will I need Berrocca this morning?
Dear Mr Spock,
Thank you so much for your help.
I updated the firmware and it was successful.
However, for animation guides, I copy files into thumb drive (I have tested putting files both in Root or in folder) and go to service mode, under "system 2" I can find "Install Data" but there is no "Load Data". Also there is an empty space under "Install Data" button in button arrangements. and when I go to "Install Data" and choose "Movie" it says "File NG".
Do you have any idea what can I do?
Thanks again,
Movie data file should begin with A5C1 for the C364e, if not you have the wrong file. Although you can load many movie data files onto 1 USB, I would recommend that in this case you ensure this is the only file. It must be an extracted file and on the root of the drive, no folders. If it still fails, you can insert the USB into any non-fax port, including the firmware update port. I have seen many of these that just would not take the movie file from the front USB port. Emujo
If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.
Thanks for your answer,
When I extract the ZIP file, it creates a folder named "a5c1an" which contains another folder named "movie" in which there are more than 20000 *.DAT files and their names start with "ZEU_*".
I have inserted USB in both Service port and the USB port near control panel, once with the "movie" folder in root and once with files copied directly to the root. I have not checked it copying "a5c1an" folder.
also I can directly connect the copier's HDD to my PC and copy the files.
Just I need to know the correct folder structure.
Bookmarks