Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Service Manager 1,000+ Posts
    bizhub 364 e  copy quality question again

    brent's Avatar
    Join Date
    Nov 2008
    Location
    Kellogg Idaho
    Posts
    1,136
    Rep Power
    44

    bizhub 364 e copy quality question again

    ok I have more information so I will try to post this again.. bizhub 364e we bought 2 brand new sight unseen and they both had problems
    the machine will come to copy it will copy but it is very faint.. I will try to include a picture on this
    the oil can is on.. it will not stabilize it will not set up like normal no machine management lists will be produced it has a p5 idc front sensor malfunction in the background also I have cleaned the slit glass and removed the laser unit and made darn sure there is northing there.. drum was replaced as well
    as a new belt unit and the developer unit also.. it seems to be none of those units any thoughts before I knock this thing over>?

    thanks yall

    brentbadcopy2.pdf

  2. #2
    Senior Tech 100+ Posts Brett GS's Avatar
    Join Date
    Jun 2013
    Location
    N/A
    Posts
    154
    Rep Power
    23

    Re: bizhub 364 e copy quality question again

    I have had the solenoid the opens the shutter for the idc sensors give me problems,you can take out the Registration unit where those sensor and solenoid sit and open the sutter and put tape on the acctuator to keep the shutter open and put it back in and test if its that.
    If it is the either the solenoid or front side board could be faulty.

    Blank copies including the meter count and demo page the try a diffrent high voltage board.

    Good luck.

  3. #3
    Master Of The Obvious 10,000+ Posts
    bizhub 364 e  copy quality question again

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: bizhub 364 e copy quality question again

    Do you have a good latent developed image on the primary belt? If yes, it's secondary transfer. If no, it's before that. What colors are affected? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  4. #4
    Certified Konica Expert 2,500+ Posts
    bizhub 364 e  copy quality question again

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,941
    Rep Power
    216

    Re: bizhub 364 e copy quality question again

    it's monochrome BC

  5. #5
    Master Of The Obvious 10,000+ Posts
    bizhub 364 e  copy quality question again

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: bizhub 364 e copy quality question again

    Quote Originally Posted by Synthohol View Post
    it's monochrome BC
    ... right. I wans't thinking. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  6. #6
    Senior Tech 250+ Posts
    Join Date
    Jan 2010
    Location
    Sydney
    Posts
    378
    Rep Power
    32

    Re: bizhub 364 e copy quality question again

    Quote Originally Posted by brent View Post
    ok I have more information so I will try to post this again.. bizhub 364e we bought 2 brand new sight unseen and they both had problems
    the machine will come to copy it will copy but it is very faint.. I will try to include a picture on this
    the oil can is on.. it will not stabilize it will not set up like normal no machine management lists will be produced it has a p5 idc front sensor malfunction in the background also I have cleaned the slit glass and removed the laser unit and made darn sure there is northing there.. drum was replaced as well
    as a new belt unit and the developer unit also.. it seems to be none of those units any thoughts before I knock this thing over>?

    thanks yall

    brentbadcopy2.pdf
    Check or try to replace the HV Unit

  7. #7
    Service Manager 1,000+ Posts
    bizhub 364 e  copy quality question again

    brent's Avatar
    Join Date
    Nov 2008
    Location
    Kellogg Idaho
    Posts
    1,136
    Rep Power
    44

    Re: bizhub 364 e copy quality question again

    I hope I get some more time this week to work on it. It's weird the back half of the copy is faint. Front is missing. I am going to look at the solenoid. And the board. Thank you

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here