koica 250 paper curls at exit

**DOE** · 10-26-2016

Konica 250 that every 4 pages or so a copy will exit and roll up. moisture in paper usually causes this but it does it with fresh paper. copier has a receiving tray, no sorter. will a worn fuser roller cause this to happen. after a few roll up it causes copier to jam. thanks for your opinion.

**mo0651** · 10-26-2016

Are you talking the B/W 250 or color C250? Some of these had decurling rollers in them when shipped. and you removed them when you installed a finisher. But if you removed finisher, you would
get curling paper at exit!

**copyrooks** · 10-26-2016

Make sure the orange rollers on the fusing exit are not gone or missing.

**Hansoon** · 10-27-2016

Yep, as said. When on the Mono Bizhub-250 the grey decurling rollers in the fuser unit are missing than you have this effect.

You might consider this or a similar solution which worked very well for us:

ExitBizhubMod.jpg

Hans