I hope it can help.
When u take out the drum unit look at the connector whit an golden pins on it. Under it should be an 2 black screws. Check the 1/16 resistor.It should be whit green color(depends from manufacturer) . Drum ratings in Service mode should be under 205.
lol deep we posted in same time
Thanks friends ,You have the reason the resistor was open. That was all the problem.
Hi,
As i read this old post i would like to ask about this di-351. I have a case here that the indication in the screen is not "Install" or "Replace" Imaging Unit, mine here indicates "Change Imaging Unit" I have no fuse available yet so what i did is get another imaging unit from a different good machine. But still the indication is not removed. Any other suggestions? (adjustments maybe?) Thank you very much.
by the way if i replace the fuse, do i still have to replace the resistor?
Last edited by goldencup; 10-01-2012 at 08:16 AM. Reason: additional question
In regard to the Minolta Di351 error message
*The imaging unit needs to be changed. call your technical representative*
I wanted to thank the posters, replacing the picofuse 1/16 A (63 mA) with a new one, really worked out. As expected the print is not perfect, but it’s acceptable.
Now, I own a giant old machine that I don’t really need.
Bookmarks