Help Im uber desparate i have realtors breathing down my back..How do I reset the code that say's "c0510"
I know it for low temp (the fuses are ok) (its because I had a power surge)
Please tell me...????>>>>>
Help Im uber desparate i have realtors breathing down my back..How do I reset the code that say's "c0510"
I know it for low temp (the fuses are ok) (its because I had a power surge)
Please tell me...????>>>>>
Considering you know this is a result of a power surge...
power the main switch on while holding down the utility key.
wait until the "Trouble Reset" button appears. select that button. power cycle the machine.
Closely monitor the machine. If you notice anything strange, turn off the main switch and call a service tech out.
I did this already and of course did it again..Unfortunately the trouble reset button did not come on only the same message "code 0510"..
Can I unplug the unit altogether? (it is networked)
Oh and by the way there is a new hotel being constructed next store and the building is slightly vibrating...What a day!~
How to clear a fuser error code (C0500, C0501, C0510, C0511, C0520, C0521).SolutionTo clear the fuser error code, perform the following after correcting the cause:3. The code should clear and a message to close the front door should appear.
1. With power ON, open the front door and locate the small, rectangular hole below the imaging unit removal tool.
Note: It is not in the same location as the models 7915/7920.
2. Insert a suitable object into the hole to actuate the reset switch .
by suitable object, use a toothpick or something plastic if you can.
Itworked!! Im A Member For Life I Hope U Win The Lotto!
Cheers:d
Where is the imaging unit removal tool?
It is the blue T shaped bit of plastic ..about 8cms tall that lives in its storage slot inside the front of the machine. Open the front door and look towards the right side, it should be there! The little hole you seek is just below it.
I have a konica minolta c350 bizhub and the hard drive sounds like an old car starting up. The hard drive needs to be replaced but where do we find a tech and where do we find the parts. The salesman from konica justs wants to sell us another copier but that is not an option for me. Can anyone help me out? My office is about forty five minutes from downtown chicago.
Thanks !
You should post a new thread using the title " Konica Minolta Tech needed outside Chicago"
The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking
Bookmarks