Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1. #1
    selbert
    Guest

    Unhappy Bizhub c350 Help! all I need is to reset.......

    Help Im uber desparate i have realtors breathing down my back..How do I reset the code that say's "c0510"

    I know it for low temp (the fuses are ok) (its because I had a power surge)

    Please tell me...????>>>>>


  2. #2
    Technician
    Join Date
    Jul 2008
    Posts
    37
    Post Thanks / Like
    Rep Power
    13
    Considering you know this is a result of a power surge...


    power the main switch on while holding down the utility key.

    wait until the "Trouble Reset" button appears. select that button. power cycle the machine.


    Closely monitor the machine. If you notice anything strange, turn off the main switch and call a service tech out.


  3. #3
    selbert
    Guest

    I did this...but wait 1 question..

    I did this already and of course did it again..Unfortunately the trouble reset button did not come on only the same message "code 0510"..

    Can I unplug the unit altogether? (it is networked)

    Oh and by the way there is a new hotel being constructed next store and the building is slightly vibrating...What a day!~


  4. #4
    Technician
    Join Date
    Jul 2008
    Posts
    37
    Post Thanks / Like
    Rep Power
    13
    How to clear a fuser error code (C0500, C0501, C0510, C0511, C0520, C0521).
    Solution
    To clear the fuser error code, perform the following after correcting the cause:
    1. With power ON, open the front door and locate the small, rectangular hole below the imaging unit removal tool.
    Note: It is not in the same location as the models 7915/7920.
    2. Insert a suitable object into the hole to actuate the reset switch .
    3. The code should clear and a message to close the front door should appear.



  5. #5
    Technician
    Join Date
    Jul 2008
    Posts
    37
    Post Thanks / Like
    Rep Power
    13
    by suitable object, use a toothpick or something plastic if you can.


  6. #6
    selbert
    Guest

    Talking Weeeeeeeeeeeeee It Worked!!

    Itworked!! Im A Member For Life I Hope U Win The Lotto!

    Cheers:d


  7. #7
    michaelwryan
    Guest

    clearing fuser code C0510 on BizhubC350

    Where is the imaging unit removal tool?



  8. #8
    Field Supervisor 500+ Posts


    minimerlin's Avatar
    Join Date
    Nov 2007
    Location
    Scottish Highlands
    Posts
    764
    Post Thanks / Like
    Rep Power
    23
    It is the blue T shaped bit of plastic ..about 8cms tall that lives in its storage slot inside the front of the machine. Open the front door and look towards the right side, it should be there! The little hole you seek is just below it.


  9. #9
    Technician
    Join Date
    Dec 2009
    Posts
    10
    Post Thanks / Like
    Rep Power
    10

    need help with bizhub c350

    I have a konica minolta c350 bizhub and the hard drive sounds like an old car starting up. The hard drive needs to be replaced but where do we find a tech and where do we find the parts. The salesman from konica justs wants to sell us another copier but that is not an option for me. Can anyone help me out? My office is about forty five minutes from downtown chicago.
    Thanks !


  10. #10
    ALIEN OVERLORD 2,500+ Posts fixthecopier's Avatar
    Join Date
    Apr 2008
    Location
    The Republic of Pineland
    Posts
    3,092
    Post Thanks / Like
    Rep Power
    62
    You should post a new thread using the title " Konica Minolta Tech needed outside Chicago"

    I May Be Old, But I Saw All The Cool Bands When They Were Cool!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •