edge of paper doesnt print on ineo 454

[jakani]

hello,

first i know it was a drum problem but it took me some time to change it a month or more then when i had the chance to change it same problem one edge doesn't print out so i thought the faulty

drum affected the transfer belt today i changed the transfer belt did a gradation adjust but still the same !

now the only thing i have in hand is changing the fusing unite ,

but i thought on asking your opinion on this

thank you very much

here i attached the counter samples to compare scan.pdf

[tech51]

There is no image on your scans. Suggest you do them again.

[CraigW]

When you click on "document properties" it states "page size" is 7.95" x 8.16"

That is what I would look into myself.

[Woxner]

i see some fading. clean your laser

[mo0651]

we have had bad printheads replaced on this series.

[jakani]

There is no image on your scans. Suggest you do them again.

it is a pdf file , you can click on scan.pdf to view it

When you click on "document properties" it states "page size" is 7.95" x 8.16"


That is what I would look into myself.

no it's the right page size it happens even when i print the counter

i see some fading. clean your laser

i changed the drum recently , what laser should i clean could you tell me more


Thank you all for your suggestions i really appreciate it

we have had bad printheads replaced on this series.

i don't think we are talking about the same printer