BH-363 mono, trailing edge part missing. Machine has about 360K on the clock.
About 10 mm at the trailing edge are skipped/condensed accompanied by a very fine line. (see attachment).
The fine line is forwarding into edge erase region but does somehow not show in the here attached scans but it goes right to the very edge of the paper.
This happens occasionally but often. Both with copies and also internal prints. Reseated memory already but no improvement. My guts are telling me either laser or logic boards. What do you guys think? I'll have to go there tomorrow back again.
SCAN-C-353-16111718430.pdf SCAN-C-353-16111718440.pdf
Hans
Bookmarks