Konica 2230 Error Code 34-01

[jknuton3813]

I am a Ricoh technician trying to help a family member that has a Konica 2230. I do not have access to the Konica service resources and I am having some difficulty finding a service manual online. In an effort to refrain from clicking on all links that claim to be a link to the manual; does anyone have a copy of the manual they could share? Does anyone know what a 34-01 code is referencing?

Thank you,
Joel Knutson

[Albonline]

I am a Ricoh technician trying to help a family member that has a Konica 2230. I do not have access to the Konica service resources and I am having some difficulty finding a service manual online. In an effort to refrain from clicking on all links that claim to be a link to the manual; does anyone have a copy of the manual they could share? Does anyone know what a 34-01 code is referencing?

Thank you,
Joel Knutson

F34-1
F34-2
F34-3
F34-4
F35-1
F35-2
F36-1
F36-2
F40-0
F41-1
Set to "0" the bit
1 in DIP SW3.
OFF of SW2
(sub power) ®
ON
TH1 (fixing temperature sensor
1) detecting temperature
(fixing temperature) exceeds
approx. 225½C. (Fixing high
temperature abnormality detection

[Albonline]

25 MODE
[1] Setting Method
A special operating mode called “25 Mode” has been provided
with this machine. This mode enables rewriting of the nonvolatile
storage and specify other various settings.
1. Turn OFF SW2 (sub power) when SW1 (main power)
remains ON.
2. Turn SW2 (sub power) ON while pressing 2 and 5 of the
copy quantity setting buttons. The 25 mode menu screen
will appear.
In the 25 mode normal copy operation becomes unavailable.
[25 MODE MENU SCREEN]
3. Press the desired item key on the LCD screen.
Each setting screen will appear.
4. Enter data in each selected screen.
5. Press the key to check the data that has been
entered.
6. Turn SW2 (sub power) off to cancel the 25 mode.
7. New data will be effective after restarting.
[2] Setting Software DIP SW
1. Setting method
This setting specifies the software DIP switch on the software
SW setting screen. (*1)
[Software SW setting screen]
Step Operation procedure
1 Enter the 25 mode.
2 [25 Mode Menu Screen]
Press the key.
3 [Software SW setting screen]
Select DIP switch number.
Use the left , key.
4 Select bit number of the DIP switch.
Use middle , key.
5 Select ON (=1) or OFF (=0) of the DIP switch.
Use or key.
: Set bit.
: Clear bit.
6 Press the key to return to the 25 mode
menu screen.

[Albonline]

as far as i know, there was never a digital service manual for this old analog copier. do your relative a favor and get them something else.