C8000 cc101 code

[beetle73]

Not a bad idea.
Still blowing fuse on the PRCB board.
Wiring harness on order.

[beetle73]

Thx for all the ideas.
Nothing worked.
Customer upgraded!

[Peterzhao]

Hi all
I have a KM C8000 with a CC101 code
Customer had power issues resulting in this code
Replaced OACB,PRCB,Memoory control bd,2 PS units ,and Nvram from a working machine
Instant code , machine will not boot
Any ideas?
Thx

Please check the power first before you do anything. I have one experence, the customer use two 110V brake to make the 220V power for Konica, later one brake cut off, the machine give us the same code.