Had a cartridge stuck and couldn't get it out by turning the clincher mechanism both ways. So to release it I used a piece of mylar to stick it under.
First you pull cartridge out to the max, then slide the mylar under cca 70mm then push the cartridge with the mylar together all the way in cca 80mm then slide out as usual. See pic below
The culprit is the feed tong that wont remain in the "No feed position"
Byting on bits.
Firmwares HERE.OK Google! ... will I need Berrocca this morning?
I've done the same thing with my pocket scale (150mm ruler). =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Posting Permissions
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks