Hello Every One
I installled network interface chip on bizhub 751 but machine still not access to network print
any idea
thanks
Hello Every One
I installled network interface chip on bizhub 751 but machine still not access to network print
any idea
thanks
how do you install network interface chip?
thats a completly new procedure to me.
More info.
Do you get the network option under admin?
Have you initialized the network settings?
Found a couple a machines where the network tab would be missing before initialization.
Whatever
Does this help?:
Or you could read the instructions in the package. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Hehe. Never done that before. Never needed to...
You made me read it.
Whatever
As far, as i remeber, there was a long time ago bulletin from minolta:
The notch at the chip was in opposite direction of the installation mark.
That ruins a lot of chips and boards also.
Cant imagine, this was coming again....
Network settings are available regardless of the print enabler (chip) as the 751 scans out of the box, it's the printer settings that won't pop up before the chip is installed. There are 2 slots, one is marked "SC" this is the security chip slot and should not be used for the print IC. There is nothing to turn on the if chip is working and installed properly. My guess is a bad chip..This should be an IC-208 for the 751. Even after installing one upside down once, it still worked when reversed and installed correctly. Emujo
If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.
Incorrect installation can be a reason. Check it again.
Bookmarks