Originally Posted by
wotsyobeef
Habik, thanks for your reply.
I managed to get a copy of the firmware just waiting on a compact flash reader to perform the upgrade. I also have new print heads ready to install, however it has warmed up a bit so the printer has been functioning correctly at the moment. For anyone experiencing similar issues, I found a very temporary workaround that may work for you whilst you wait on parts or an engineer.
Open the front door
Switch the printer off
Switch the printer back on again
Wait for the printer to boot up (It will still show the error message)
Close the front door
The printer will reboot without the issue
Bookmarks