Results 1 to 7 of 7
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Jun 2008
    Posts
    56
    Rep Power
    33

    obtain device information not working/ user authentication problem

    Hi
    I am having a problem with a bizhub C554e and the PCL6 driver v 5.1.3

    When I click on the Obtain Device information I get "Printers cannot be connected. Check the Port Settings.......". I have tried changing all of the Obtain settings- Auto on, Auto off etc. I have tried with SNMP enabled on the Port and disabled. SNMP is on on the machine. I have tried a different Port IP that is working with another bizhub. I have matched the the Function Version (7) with the driver.

    Nothing helps.

    The machine has User Authentication enabled. If I set the driver option to On (MFP) manually , the username selected will verify on the driver. If I print, nothing prints out and the Job List shows Error deletion- and details show a Login error

    I would be grateful for any advice

    Cheers
    Pat

  2. #2
    Field Supervisor 500+ Posts B0265's Avatar
    Join Date
    Jan 2007
    Posts
    713
    Rep Power
    46

    Re: obtain device information not working/ user authentication problem

    If you set all options manually make sure you have selected the correct model (C554e) otherwise you will get a login error.

  3. #3
    Field Supervisor 2,500+ Posts
    Join Date
    Jun 2009
    Posts
    3,009
    Rep Power
    96

    Re: obtain device information not working/ user authentication problem

    Check your firmware version and function level, they must match the driver you are using. If you feel these are correct, then it's going to be an SNMP issue. Emujo
    If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

  4. #4
    Trusted Tech 50+ Posts
    Join Date
    Jun 2008
    Posts
    56
    Rep Power
    33

    Re: obtain device information not working/ user authentication problem

    Thanks for your replies. I have solved the issue and it was indeed a driver/machine mismatch but an unusual one.

    The machine is definitely a KM original purchased direct from KM - but on logging into the GUI, I noticed there is no page banner for PageScope and the machine is reporting itself as Generic 55C-6e. So I downloaded a Develop ineo+554e (Generic 55C-6e) driver and Obtain Device Information updated with no problem.

    Turned out Dipswitch 10 set incorrectly

    Thanks for your help

    Cheers

    Pat
    Last edited by patk; 12-08-2016 at 10:59 AM.

  5. #5
    Service Manager 1,000+ Posts
    obtain device information not working/ user authentication problem

    habik's Avatar
    Join Date
    Apr 2010
    Posts
    2,015
    Rep Power
    59

    Re: obtain device information not working/ user authentication problem

    Quote Originally Posted by patk View Post
    Thanks for your replies. I have solved the issue and it was indeed a driver/machine mismatch but an unusual one.

    The machine is definitely a KM original purchased direct from KM - but on logging into the GUI, I noticed there is no page banner for PageScope and the machine is reporting itself as Generic 55C-6e. So I downloaded a Develop ineo+554e (Generic 55C-6e) driver and Obtain Device Information updated with no problem.

    Turned out Dipswitch 10 set incorrectly

    Thanks for your help

    Cheers

    Pat
    Hi Pat
    Would you mind to share?
    What was it originally set as and what was the new DIP SW setting?
    Thanks
    .OK Google! ... will I need Berrocca this morning?
    Firmwares HERE

  6. #6
    Technician
    Join Date
    Apr 2013
    Location
    Cleveland, OH
    Posts
    46
    Rep Power
    23

    Re: obtain device information not working/ user authentication problem

    Quote Originally Posted by habik View Post
    Hi Pat
    Would you mind to share?
    What was it originally set as and what was the new DIP SW setting?
    Thanks
    Bump. One of my hardware techs just replaced the MFPB on a C554e, and now the customer says they can't staple. When I went to the web page it said "Generic 55c-6e" and I don't know where to go from here...

  7. #7
    Trusted Tech 50+ Posts
    Join Date
    Jun 2008
    Posts
    56
    Rep Power
    33

    Re: obtain device information not working/ user authentication problem

    In software switch 10, set hex assignment to 02

    Cheers
    Last edited by patk; 03-20-2017 at 06:01 PM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here