Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Technician
    Join Date
    Aug 2010
    Posts
    24
    Rep Power
    28

    J72-19 FS-534 Konica Bizhub 654

    Hi All,

    Loosing the will to live with this fault, im getting an intermittent fault code of J72-19 on the smaller FS-534 finisher that only appears to happen after a long run of copies. the firmware is bang up to date and sensors changed (PS5 and PS4). it looks like its jamming at the entrance to the horizontal transport section straight after the exit from the turnaround unit. Anyone have any ideas or had something similar? ive checked all previous threads and nothing has worked so far.

    Many thanks in advance.

  2. #2
    Master Of The Obvious 10,000+ Posts
    J72-19 FS-534 Konica Bizhub 654

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: J72-19 FS-534 Konica Bizhub 654

    Google works quite nicely to find this sort of information:

    FS-534 alignment plate wearing.
    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here