Hi,
it is possible to eliminate the safety lines on konica machine
perhaps changing some swicth or a firmware?
thanks
Hello, it is possible to eliminate the safety lines on konica machine, perhaps changing some swicth or a firmaware appropriate?
Hi,
it is possible to eliminate the safety lines on konica machine
perhaps changing some swicth or a firmware?
thanks
Hello, it is possible to eliminate the safety lines on konica machine, perhaps changing some swicth or a firmaware appropriate?
just follow the setup procedure correctly step by step.
Yep follow the set up completely work on a machine not too long ago and all I need to do was put in the serial number for the ADF in and restarted worked fine after. Good Luck
The machine is a C220, with 100000 copies.Suddenly it started doing this problem.
The machine is a C220, with 100000 copies.Suddenly it started doing this problem.
First, what is your definition of "security lines"?
Second, what has been done to this machine in its past 100,000 pages of output? What has been replaced and/or modified?
Third, are the "security lines" any specific color, or are they random colors? If the lines are cyan or magenta only, I would also suspect the setup procedure had been done incorrectly, however I cannot explain the reason this would suddenly begin after a usage of approximately 100,000 pages.
Fourth, was the machine wiped completely, HDD formatted, NVRAM replaced or removed (if present to begin with)?
Fifth, please consider uploading an image of the lines you refer to, so we can better provide assistance to you.
Somewhere there is a tree working hard to produce oxygen for you to live, NOW GO APOLOGIZE TO IT!
We call them the "Lines Of Shame".
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
SKMBT_C25317011908530.pdf
It was changed the black drum and the transfer belt.
The lines are only cyan and magenta.
I tried to do a data initialization.
Last edited by DPSolutions; 01-19-2017 at 08:39 AM.
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Bookmarks