Results 1 to 6 of 6
  1. #1
    Technician
    Join Date
    Apr 2012
    Posts
    13
    Rep Power
    25

    C3351 Airprint setting

    Info
    You may find the Airprint option missing when going into network settings.Nothing in the service manual tells you how to turn it on.
    This is to do with the function ver.
    Setting the FW Function version on SW 25 from 60 to 20 allows the selection of Airprint in the Admin - network settings menu page.
    Hope this helps

  2. #2
    Trusted Tech 50+ Posts
    Join Date
    May 2016
    Posts
    53
    Rep Power
    0

    Re: C3351 Airprint setting

    did you reported this bug to KM helpdesk?

  3. #3
    Senior Tech 250+ Posts
    Join Date
    Feb 2008
    Posts
    437
    Rep Power
    38

    Re: C3351 Airprint setting

    I don't think this is a "bug", rather it is a limitation of the function version that you were at. On a lot of machines, the Airprint option isn't available on earlier Function Versions.

  4. #4
    Trusted Tech 50+ Posts
    Join Date
    May 2016
    Posts
    53
    Rep Power
    0

    Re: C3351 Airprint setting

    Quote Originally Posted by 907tec View Post
    I don't think this is a "bug", rather it is a limitation of the function version that you were at. On a lot of machines, the Airprint option isn't available on earlier Function Versions.
    but when setting soft switch 25 from hex 60 to hex 20 you are downgrading function version! so i don't understand why newer firmware should restrict some functions? always newer firmware has higher hex in soft switch 25. and hex 60 is function version 3.2 as i remember deployed with firmware version g00-k8

  5. #5
    Certified Konica Expert 2,500+ Posts
    C3351 Airprint setting

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,943
    Rep Power
    216

    Re: C3351 Airprint setting

    the official answer is:
    Problem
    AirPrint button is not available in Administrator Mode > Network

    Solution
    CAUSE: Incorrect software switch setting.

    SOLUTION: Perform the following procedure:

    1. Enter Service Mode.
    2. Select System 2.
    3. Select Software Switch Settings.
    4. Select Sw 25.
    5. Change setting to HEX 40 and select Fix.
    6. Cycle the power on the machine and now the AirPrint button should be available to select.

  6. #6
    RTFM!! 5,000+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    5,387
    Rep Power
    152

    Re: C3351 Airprint setting

    Quote Originally Posted by docdot69 View Post
    but when setting soft switch 25 from hex 60 to hex 20 you are downgrading function version! so i don't understand why newer firmware should restrict some functions? always newer firmware has higher hex in soft switch 25. and hex 60 is function version 3.2 as i remember deployed with firmware version g00-k8
    Don't think of it as a higher or lower level. Its there to resolve incompatibilities between different technologies and functions.
    So instead of endlessly loading firmware its fixable with a soft switch.
    Whatever

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here