C6500 with cyan and magenta lines on the prints and copies only.
Test pattern prints normally.
Any tips?
500k counter.
C6500 with cyan and magenta lines on the prints and copies only.
Test pattern prints normally.
Any tips?
500k counter.
I'm not very good at imagining image quality issues. Maybe you could include visual aids, like a scanned sample? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
WhatsApp Image 2017-03-03 at 16.34.12.jpg
One print in sequence, the lines alternate between magenta and cyan...
looks like security issue. what was just done to it?
20160701_084225_resized.jpgWhatsApp Image 2017-03-03 at 16.56.06.jpg
I found these modes in Bizhub C6500 and Bizhub C7000.
I believe I can help ...
Exactly. New customer. First time with the equipment.
I do not know what was done to him.
I did the installation procedure again, but without result.
I noticed that in the Serial Number Setting item, I can type the number.
However the equipment is found, according to the label on the body.
I already consulted all manuals, but without result.
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Bookmarks