Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Junior Member
    Join Date
    Jan 2016
    Posts
    2
    Rep Power
    0

    Question 284e don't active key counter if vender

    I have a Konica 284e, when active "key counter if vender" from "Management function choice" of the printer in ready copy as if it were already inserted the card into the reader.
    This defect makes it even when the card reader is detached from the printer.
    Already updated the printer, change the PRCB and made a clear date.

    What can it be?

  2. #2
    Field Supervisor 2,500+ Posts
    Join Date
    Jun 2009
    Posts
    3,009
    Rep Power
    96

    Re: 284e don't active key counter if vender

    What vendor key counter are you trying to add? Some MFPs have a loopback connector that must be removed and the key counter device takes it's place. Emujo
    If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

  3. #3
    Junior Member
    Join Date
    Jan 2016
    Posts
    2
    Rep Power
    0

    Re: 284e don't active key counter if vender

    I use microrex mx300. But whitout card reader connected i have this problem too.

  4. #4
    RTFM!! 5,000+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    5,387
    Rep Power
    152

    Re: 284e don't active key counter if vender

    Loadable device driver installed??

    Must be set to the correct mode.
    Whatever

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here