Results 1 to 6 of 6

Thread: J3202 ON C6500

  1. #1
    Technician
    Join Date
    Jun 2016
    Location
    aiud
    Posts
    46
    Post Thanks / Like
    Rep Power
    2

    J3202 ON C6500

    Hallo

    I have this eror code J3202 wen i print paper 150gr full photto,all print remaine bloks on the the upper roll of the oven..What can I do to fix the problem ? the problem only occurs when printing on thin paper 80-150gr.I left 2 cm white rim with no image...problem persist
    Plese help my

    Thanks


  2. #2
    Field Supervisor 500+ Posts


    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    779
    Post Thanks / Like
    Rep Power
    15

    Re: J3202 ON C6500

    not all brands/types of paper are certified or supported to run on the C6500.
    is the paper coated? is it unsupported photo paper?
    post the exact paper specs or a pic of the label if you can.


  3. #3
    Technician
    Join Date
    Jun 2016
    Location
    aiud
    Posts
    46
    Post Thanks / Like
    Rep Power
    2

    Re: J3202 ON C6500

    Quote Originally Posted by Synthohol View Post
    not all brands/types of paper are certified or supported to run on the C6500.
    is the paper coated? is it unsupported photo paper?
    post the exact paper specs or a pic of the label if you can.
    Hallo

    Paper is coated 150gr Symbol Fedrigoni

    http://www.fedrigoni.co.uk/sites/fed...%20Gloss_0.pdfThanks

    Last edited by liondor1969; 4 Weeks Ago at 01:23 PM.

  4. #4
    Field Supervisor 500+ Posts
    Join Date
    Dec 2008
    Location
    Baltimore, Maryland
    Posts
    550
    Post Thanks / Like
    Rep Power
    22

    Re: J3202 ON C6500

    after the FUSER (you call it the OVEN) there is a slider, that sets the exit rollers of the fuser (OVER). May want to open or close. I assume that its all the way to the left, where you want it for heavy stock, but for lighter stock move it in the center or closes to the front of the OVEN.

    That paper is high recycled content and heavy gloss... I would try a NATIONAL BRAND 118gsm paper and see if that gives you issues as well.


  5. #5
    Field Supervisor 500+ Posts


    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    779
    Post Thanks / Like
    Rep Power
    15

    Re: J3202 ON C6500

    that paper is made for ink, says "letterpress, offset, blind embossing, hot foil stamping thermography and screen printing."
    when you dont see the word "Laser", thats the first strike, no "high speed copying" or the mention of a copier/laser puts that paper in a bad light to use in the machine.
    here is the official papers supported by Konica, i'm sure you will find a better certified substitute.

    Attached Files Attached Files

  6. #6
    Technician
    Join Date
    Jun 2016
    Location
    aiud
    Posts
    46
    Post Thanks / Like
    Rep Power
    2

    Re: J3202 ON C6500

    Quote Originally Posted by Synthohol View Post
    that paper is made for ink, says "letterpress, offset, blind embossing, hot foil stamping thermography and screen printing."
    when you dont see the word "Laser", thats the first strike, no "high speed copying" or the mention of a copier/laser puts that paper in a bad light to use in the machine.
    here is the official papers supported by Konica, i'm sure you will find a better certified substitute.


    Many thanks for advice,I learn and I'm beginning in this job.I tried to look for a cheaper paper with good qualities,


    Thanks


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •