Results 1 to 9 of 9
  1. #1
    Senior Tech 100+ Posts oldschool's Avatar
    Join Date
    Mar 2007
    Location
    Ithaca NY
    Posts
    244
    Rep Power
    37

    Looking for a connecter number

    A tech asked me where the (Vendor or Vender) connecter is on a C654e is. I thought all of the e series was CN42. He tells me that is not the same for this model (C654e) If anyone has a service manual handy, could you search it for vendor and vender (Konica Minolta spells it differently on the wiring diagram) and let me know the connector number and and possibly an approximate location.

    Thanks for your help
    Jamex Tech Support: Saving the world one phone call at a time.

  2. #2
    Master Of The Obvious 10,000+ Posts
    Looking for a connecter number

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: Looking for a connecter number

    On the smaller "e" series, there are two coinop connectors. There's CN42 on the PRCB and the 4 pin connector that dead ends up by the scanner left frame. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Senior Tech 100+ Posts oldschool's Avatar
    Join Date
    Mar 2007
    Location
    Ithaca NY
    Posts
    244
    Rep Power
    37

    Re: Looking for a connecter number

    Thanks for the reply.
    I did tell the tech CN42 but he claims the c654e does not have it. He said he'd looked at a c554e and was able to locate CN42.
    Jamex Tech Support: Saving the world one phone call at a time.

  4. #4
    Certified Konica Expert 2,500+ Posts
    Looking for a connecter number

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,941
    Rep Power
    216

    Re: Looking for a connecter number

    Bottom left connector on prcb <----wrong info.

    [edit]
    soo sorry, i had my 454e manual open also and i searched the wrong PDF and gave misinformation.
    i apologize.
    Last edited by Synthohol; 03-01-2017 at 11:33 PM. Reason: new info

  5. #5
    Senior Tech 100+ Posts oldschool's Avatar
    Join Date
    Mar 2007
    Location
    Ithaca NY
    Posts
    244
    Rep Power
    37

    Re: Looking for a connecter number

    I know it has to be an 8 position connector so would that be CN30? c753e-c654e.pdf
    Last edited by oldschool; 03-01-2017 at 03:25 PM. Reason: jpg was too hard to read uploaded a pdf.
    Jamex Tech Support: Saving the world one phone call at a time.

  6. #6
    Senior Tech 100+ Posts oldschool's Avatar
    Join Date
    Mar 2007
    Location
    Ithaca NY
    Posts
    244
    Rep Power
    37

    Re: Looking for a connecter number (solved)

    The word from Konica Minolta is the connector is well hidden but it is CN-42. They said you have to remove the foil sheath to get to the HDD and CN-42 is under there. They didn't say specifically what board it was but the photo Konica Minolta sent me does not seem to match the connector layout the tech sent me.
    Jamex Tech Support: Saving the world one phone call at a time.

  7. #7
    Master Of The Obvious 10,000+ Posts
    Looking for a connecter number

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: Looking for a connecter number

    Follow CN33 on the PRCB to CN381.

    Vendor connection1.JPGVender connection2.JPG

    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  8. #8
    Senior Tech 100+ Posts oldschool's Avatar
    Join Date
    Mar 2007
    Location
    Ithaca NY
    Posts
    244
    Rep Power
    37

    Re: Looking for a connecter number

    Thanks Blackcat!!!. This appears to be the correct information. I went back to Konica Minolta asking if they could explain why the information they'd sent me was so different. It seems it was a hastily read email regarding the copier model. He thought it was a c554e.

    To sum up for anyone else that stumbles across this thread.
    The vendor II connecter for a c654e/c754e is CN 33 (PRCB) or CN 381 (harness). Our cable has a socket to pin adaptor on it to allow it to connect directly to the board or to the harness so either connector will work. In the past the harness connector is just below the doc feeder near the right hinge (as facing the rear from the copier). Some have been nearer to the left hinge. It was usually a bundle of purple wires with an 8 position socket connector on the end. This is likely where CN -381 is on a c654e/c754e.

    The c554e vendor II connector is CN 42 (PRCB) and is hidden behind the HDD.

    The C454e vendor II connector is CN 42 (PRCB) and is in the lower left corner of the board.
    Last edited by oldschool; 03-02-2017 at 08:58 PM.
    Jamex Tech Support: Saving the world one phone call at a time.

  9. #9
    Master Of The Obvious 10,000+ Posts
    Looking for a connecter number

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: Looking for a connecter number

    Your welcome! I may not have found it if I had not tried both spellings: vendor/vender.
    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here