Results 1 to 2 of 2
  1. #1
    Field Supervisor 500+ Posts
    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    632
    Post Thanks / Like
    Rep Power
    31

    Konica minolta LCC LU-301

    Biz C454 recognizes the LU-301 but paper won't lift. Nothing moves. Checked all connectors & interlocks. Since there isn't much to these I suspect the board is bad? It had been working fine then this happened.

    Any other ideas appreciated.

    Thanks in advance

    Last edited by copyman; 03-13-2017 at 04:02 PM.

  2. #2
    Field Supervisor 500+ Posts
    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    632
    Post Thanks / Like
    Rep Power
    31

    Re: Konica minolta LCC LU-301

    Tried a different LU-301 and now the display shows jam when powered up (see pic) and won't reset. Put the original LU back on and same jam message. Disconnect the LU's and everything is fine, including feeding from base LCC (PC-410). Weird both LU's are doing same thing, not allowing jam to reset?

    IMG_0437.jpg

    Attached Images Attached Images

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •