Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: C654e

  1. #1
    Senior Tech 250+ Posts tufbnme's Avatar
    Join Date
    Feb 2008
    Location
    BUILD THE WALL! State
    Posts
    489
    Rep Power
    38

    C654e

    I'm a Ricoh guy and what I thought was a good customer purchased a used C654e (instead of the Ricoh I proposed), anyway, he would like me to set it up, install the bridge unit and finisher. I connected them but the machine does not recognize them, I guess something may need to be turned on in the service mode.
    First, how do I enter the service mode?
    second, once in where do I need to go
    and third if anyone has a manual for sale let me know.
    Thanks

  2. #2
    Certified Konica Expert 2,500+ Posts
    C654e

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,941
    Rep Power
    216

    Re: C654e

    nothing needs to be setup. you have 2 cables to hook up 1 from bridge to finisher and from finisher to the upper left corner where the ADF wire is.
    as far as a manual, i play drums so your avatar gets you a link in a PM in a minute

  3. #3
    Senior Tech 250+ Posts tufbnme's Avatar
    Join Date
    Feb 2008
    Location
    BUILD THE WALL! State
    Posts
    489
    Rep Power
    38

    Re: C654e

    Thanks for the info. I hooked up the bridge and finisher, connected the wires but still no recognition.

  4. #4
    Master Of The Obvious 10,000+ Posts
    C654e

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: C654e

    Which wires?
    Was the machine fully Off (not just the switch on the op panel)?
    Did you follow the setup instructions?
    Have you updated firmware?

    What models of accessories?

    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #5
    Senior Tech 250+ Posts tufbnme's Avatar
    Join Date
    Feb 2008
    Location
    BUILD THE WALL! State
    Posts
    489
    Rep Power
    38

    Re: C654e

    The wires coming from the bridge and the finisher (FS535) I have no installation instructions, can't find it in the manual either. Turned it off on the main switch (not just op panel)

  6. #6
    Field Supervisor 500+ Posts Woxner's Avatar
    Join Date
    Jul 2011
    Location
    Felixstowe England
    Posts
    780
    Rep Power
    41

    Re: C654e

    here is the install info
    Attached Files Attached Files

  7. #7
    Master Of The Obvious 10,000+ Posts
    C654e

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: C654e

    You'll need to plug in the cable from the finisher to the back of the machine also. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  8. #8
    Master Of The Obvious 10,000+ Posts
    C654e

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: C654e

    Quote Originally Posted by blackcat4866 View Post
    Which wires?
    Was the machine fully Off (not just the switch on the op panel)?
    Did you follow the setup instructions?
    Have you updated firmware?

    What models of accessories?

    =^..^=
    ??
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  9. #9
    Senior Tech 100+ Posts
    C654e


    Join Date
    Feb 2011
    Location
    Las Vegas
    Posts
    220
    Rep Power
    31

    Re: C654e

    you may need to enter the serial number of the finisher into the machine for it to recognize that it is connected.

  10. #10
    RTFM!! 5,000+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    5,387
    Rep Power
    152

    Re: C654e

    Quote Originally Posted by Reed View Post
    you may need to enter the serial number of the finisher into the machine for it to recognize that it is connected.

    Huh..
    Whatever

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here