Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: C654e

  1. #1
    Service Manager 250+ Posts tufbnme's Avatar
    Join Date
    Feb 2008
    Location
    Mexifornia
    Posts
    319
    Post Thanks / Like
    Rep Power
    23

    C654e

    I'm a Ricoh guy and what I thought was a good customer purchased a used C654e (instead of the Ricoh I proposed), anyway, he would like me to set it up, install the bridge unit and finisher. I connected them but the machine does not recognize them, I guess something may need to be turned on in the service mode.
    First, how do I enter the service mode?
    second, once in where do I need to go
    and third if anyone has a manual for sale let me know.
    Thanks


  2. #2
    Field Supervisor 500+ Posts


    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    897
    Post Thanks / Like
    Rep Power
    17

    Re: C654e

    nothing needs to be setup. you have 2 cables to hook up 1 from bridge to finisher and from finisher to the upper left corner where the ADF wire is.
    as far as a manual, i play drums so your avatar gets you a link in a PM in a minute


  3. #3
    Service Manager 250+ Posts tufbnme's Avatar
    Join Date
    Feb 2008
    Location
    Mexifornia
    Posts
    319
    Post Thanks / Like
    Rep Power
    23

    Re: C654e

    Thanks for the info. I hooked up the bridge and finisher, connected the wires but still no recognition.


  4. #4
    Master Of The Obvious 10,000+ Posts


    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    14,760
    Post Thanks / Like
    Rep Power
    237

    Re: C654e

    Which wires?
    Was the machine fully Off (not just the switch on the op panel)?
    Did you follow the setup instructions?
    Have you updated firmware?

    What models of accessories?

    =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  5. #5
    Service Manager 250+ Posts tufbnme's Avatar
    Join Date
    Feb 2008
    Location
    Mexifornia
    Posts
    319
    Post Thanks / Like
    Rep Power
    23

    Re: C654e

    The wires coming from the bridge and the finisher (FS535) I have no installation instructions, can't find it in the manual either. Turned it off on the main switch (not just op panel)


  6. #6
    Service Manager 250+ Posts Woxner's Avatar
    Join Date
    Jul 2011
    Location
    Felixstowe England
    Posts
    285
    Post Thanks / Like
    Rep Power
    14

    Re: C654e

    here is the install info

    Attached Files Attached Files

  7. #7
    Master Of The Obvious 10,000+ Posts


    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    14,760
    Post Thanks / Like
    Rep Power
    237

    Re: C654e

    You'll need to plug in the cable from the finisher to the back of the machine also. =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  8. #8
    Master Of The Obvious 10,000+ Posts


    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    14,760
    Post Thanks / Like
    Rep Power
    237

    Re: C654e

    Quote Originally Posted by blackcat4866 View Post
    Which wires?
    Was the machine fully Off (not just the switch on the op panel)?
    Did you follow the setup instructions?
    Have you updated firmware?

    What models of accessories?

    =^..^=
    ??

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  9. #9
    Trusted Tech 50+ Posts
    Join Date
    Feb 2011
    Location
    Las Vegas
    Posts
    97
    Post Thanks / Like
    Rep Power
    13

    Re: C654e

    you may need to enter the serial number of the finisher into the machine for it to recognize that it is connected.


  10. #10
    RTFM!! 1,000+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    2,421
    Post Thanks / Like
    Rep Power
    48

    Re: C654e

    Quote Originally Posted by Reed View Post
    you may need to enter the serial number of the finisher into the machine for it to recognize that it is connected.

    Huh..

    Whatever

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •