Results 1 to 4 of 4
  1. #1
    Technician
    Join Date
    Jan 2017
    Location
    GILLINGHAM
    Posts
    24
    Post Thanks / Like
    Rep Power
    1

    Konica Minolta Bizhub C253

    Hello

    I have a C253 showing a C0202 error...

    It seemed to be a damaged lift motor, the plastic clips had snapped off the motor assembly allowing the end to fall off...

    The motor has been replaced, but still getting the error...

    I tried swapping the lift sensors between tray 1 and 2, but the fault remains with tray 1... There are, or appear to be no obstructions... certainly no paper jammed anywhere which is the normal cause of this issue....

    Any suggestions?

    Thanks


  2. #2
    Master Of The Obvious 10,000+ Posts


    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    14,843
    Post Thanks / Like
    Rep Power
    240

    Re: Konica Minolta Bizhub C253

    Do you get 24vdc to the lift motor when you close the tray? Does the motor run? =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  3. #3
    Field Supervisor 500+ Posts


    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    942
    Post Thanks / Like
    Rep Power
    19

    Re: Konica Minolta Bizhub C253

    Try a trouble reset.


  4. #4
    Technician
    Join Date
    Jan 2017
    Location
    GILLINGHAM
    Posts
    24
    Post Thanks / Like
    Rep Power
    1

    Re: Konica Minolta Bizhub C253

    Tried trouble reset...

    I'll check the voltage at the lift motor... and I can't hear the lift motor.. but that's no guarantee its not running....

    Thanks


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •