Results 1 to 3 of 3
  1. #1
    Senior Tech 100+ Posts
    Bizhub 363 DF-621

    Cookr's Avatar
    Join Date
    Dec 2011
    Location
    Metro Detroit Area,MI
    Posts
    184
    Rep Power
    26

    Bizhub 363 DF-621

    Working on this Bizhub 363 and keep getting Jam 66-02 the feeder will scan all the sheets in but when the last one comes out it says there is a jam? but if i hold down on the top corner of the feeder it works fine (right about where it latches on the gear side but the latch is not broke) Ive replace the A143PP9R00 Gear Assy but no good even though the other one fell apart when i took it off. Thanks

  2. #2
    Senior Tech 100+ Posts TheBlueOrleans's Avatar
    Join Date
    Aug 2012
    Location
    The United States of America
    Posts
    232
    Rep Power
    28

    Re: Bizhub 363 DF-621

    replace the latch? I believe the part number search calls it a "knob". also might check the sensors in the feed path, could be dusty.
    Somewhere there is a tree working hard to produce oxygen for you to live, NOW GO APOLOGIZE TO IT!

  3. #3
    Senior Tech 250+ Posts
    Bizhub 363 DF-621

    CraigW's Avatar
    Join Date
    Dec 2010
    Posts
    417
    Rep Power
    32

    Re: Bizhub 363 DF-621

    Get the new style "paper present" actuator and it's associated magnet. Very common issue when running @ 70 OPM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here