This parts change is only 1-1.5 years old.
KMBS still has the same 2014 version parts manual on their site.
IIRC= If I Remember Correctly.
This parts change is only 1-1.5 years old.
KMBS still has the same 2014 version parts manual on their site.
IIRC= If I Remember Correctly.
I tried to put the actuator with magnet A3CFPP4VOO from a 4/e series (DF624 & DF701) onto a DF621 (BH223 series) and it won't work. The top end is too big, preventing it from swinging completely down.
Still some value in gluing the magnet only A3CFPP1700 onto the old style DF621 actuator as long as the lid is not warped above 25+ mm.
Originally Posted by CraigW
^^^
Actuator = A3CFPP4VOO
Magnet = A3CFPP1700
The 621 IIRC does NOT have these from factory though.
Just to close out this old post, that new style lever & magnet for the 4e series DF629 & DF701 is working well on these older DF621 on 223 series. We just had to cut a couple of mm off the top of the new 4e style lever... Nipping it just at the top of the round circle stamped into the top with a number in it.
THANKS CRAIGW!
Bookmarks