Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Technician rofield67's Avatar
    Join Date
    May 2014
    Location
    New York
    Posts
    15
    Rep Power
    21

    konica minolta press c6000 black banding

    Intermittent Black banding with dark 1 inch darker band on trailing edge. Banding shows on black half tones and darker band will show on non image area even on color monochrome test pages. If I open and close process assembly problem will go away for a short time, maybe a couple hundred pages. I have replaced drum, charger, developer and developer unit. I have attached picture of a test page 53 density 100, this page is usually very smooth without all the banding. Has anyone experienced this problem? Thanks!
    Attached Files Attached Files

  2. #2
    Senior Tech 100+ Posts khattab.al.masry's Avatar
    Join Date
    Jan 2014
    Posts
    212
    Rep Power
    0

    Re: konica minolta press c6000 black banding

    Ckeck corona assy. for black and change if needed

    تم الإرسال من SM-J700H باستخدام Tapatalk

  3. #3
    Technician rofield67's Avatar
    Join Date
    May 2014
    Location
    New York
    Posts
    15
    Rep Power
    21

    Re: konica minolta press c6000 black banding

    replaced with new and also swapped with other colors, no change. Maybe arching connector on machine frame or bad HVT, HVT and connectors very difficult to access on this model, my have to try it anyway.

  4. #4
    Junior Member
    konica minolta press c6000 black banding


    Join Date
    Mar 2019
    Location
    Hamburg
    Posts
    4
    Rep Power
    0

    Re: konica minolta press c6000 black banding

    Does anyone find a solution for this Problem? i have seen 3 machines with this.
    Removing the process mount will solve this problem for a few days or hours. All machines got this just with the black color.
    Drum/Dev Unit/Corona are replaced with new ones. Same Situation

    Thanks!

  5. #5
    Trusted Tech 50+ Posts
    Join Date
    Mar 2010
    Posts
    60
    Rep Power
    29

    Re: konica minolta press c6000 black banding

    Is that the trailing edge? If it is the inboard edge instead, try putting some tape on the drum plate where it touches the dev unit yellow bearing (increasing a little bit the distance between the drum and the developer roll).

  6. #6
    Field Supervisor 500+ Posts
    konica minolta press c6000 black banding

    tulintron's Avatar
    Join Date
    Jul 2014
    Location
    Belo Horizonte, Minas Gerais
    Posts
    641
    Rep Power
    32

    Re: konica minolta press c6000 black banding

    Quote Originally Posted by rofield67 View Post
    Intermittent Black banding with dark 1 inch darker band on trailing edge. Banding shows on black half tones and darker band will show on non image area even on color monochrome test pages. If I open and close process assembly problem will go away for a short time, maybe a couple hundred pages. I have replaced drum, charger, developer and developer unit. I have attached picture of a test page 53 density 100, this page is usually very smooth without all the banding. Has anyone experienced this problem? Thanks!
    Good Morning. What is the size of the paper and what is the direction of the introduction?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here