When I went to the machine, it had the message on the panel saying tray 2 could not be used. I looked behind the tray, removed the paper stuck there, reset the tray to the machine and rebooted. It coded C0204. I checked the tray again, left it out of the machine, rebooted and it coded again. The error is for lift and without the tray in, the motor never turns on. To get the machine up, I went back into service and disabled the tray. Called KMBS and they had no calls matching mine, and took a guess at the PRCB. Before I swap it, I wanted to know if anyone has seen this.
Bookmarks