Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Step aside, noob 1,000+ Posts EarthKmTech's Avatar
    Join Date
    May 2009
    Location
    Gigety
    Posts
    2,141
    Rep Power
    75

    Vendor Mode 2 limitations

    mainly on the new 8 series though, its probably the same for the old machines too.

    Is there a way to restore multitasking to the machine in this mode, ie, being able to change into scan mode while a copy / print is being performed? I do not recall.

    Currently it will only allow you to do one thing at a time, though if i remember correctly thats just how it is...
    Last edited by EarthKmTech; 04-27-2017 at 11:33 AM.

  2. #2
    Master Of The Obvious 10,000+ Posts
    Vendor Mode 2 limitations

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,434
    Rep Power
    462

    Re: Vendor Mode 2 limitations

    I found a bulletin on the bizhub 364e, that listed DIPSW settings to restore some of those functions. I'll see if I can locate it. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Senior Tech 100+ Posts
    Vendor Mode 2 limitations


    Join Date
    Nov 2008
    Posts
    206
    Rep Power
    34

    Re: Vendor Mode 2 limitations

    Quote Originally Posted by EarthKmTech View Post
    mainly on the new 8 series though, its probably the same for the old machines too.

    Is there a way to restore multitasking to the machine in this mode, ie, being able to change into scan mode while a copy / print is being performed? I do not recall.

    Currently it will only allow you to do one thing at a time, though if i remember correctly thats just how it is...
    I had the issue of a c284e a couple of years ago, took weeks to get it sorted out. Here is a couple things to check that I recorded at the time.

    dip switch 30 bit 5 hex 20 enables multi job ability.

    when setting up key counter in vendor mode set next job reservation to license- default is ban.

    Try those 2 first to see if it helps

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here