hi
i want to enter the sp mode for the biz 363 but some one change the password can i know if there any way to enter the sp mode
thanks for you all
hi
i want to enter the sp mode for the biz 363 but some one change the password can i know if there any way to enter the sp mode
thanks for you all
If someone has enabled the CE (service) password then you will need the NVram reset firmware to clear it.
If you want to clear the Administrator password simply enter CE mode & press stop>0>C you can clear it from here.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
what peocedure are you using to enter service mode. should be stop 00 stop 01. its rare someone changes the passcode for service. if password is needed have you tried00000000
Try 9272927292729272 that is also a known Bizhub password.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Bookmarks