Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 33
image light at lead edge
Bizhub c500 pro
we had a problems with this machine last week. and it ended up being the blades were set to tight on the developer unit cyan.
the problem we are having now is that the lead edge of the print, you can see it good on text has a ghost effect. the lead edge of the text is a little lighter in color than the rest. this only happens in the color text, not black.
I have seen this on a black and white copier but I cannot remember what we did to fix it.
would the write adjustment help?
Thanks
-
what is the restart timing like?
-
Technician
- Rep Power
- 22
Re: image light at lead edge
Back from the dead.... I'm interested too.
Leading edge of cyan text faded for 1-2 characters, fairly small point text. Bizhub C550.
-
Technician
- Rep Power
- 22
Re: image light at lead edge
Figured it out, IU was low on toner.
Go into service mode, then eventually into TCR Supply. Click on the colour with the issue. Hit START. Sometimes it takes two cycles to fill the IU properly.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks