Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Field Supervisor 500+ Posts
    C754e FS535 with SD unit

    copytechman's Avatar
    Join Date
    Nov 2008
    Location
    Barrie, Ontario
    Posts
    909
    Rep Power
    44

    C754e FS535 with SD unit

    This thing is a stinker to see into, but the paper doesnt consistently fall all the way down or hangs on something when it drops causing a misalignment when it folds, all mylars look good, was considering replacing the set of 4 paddles at the bottom, I dont even think the set of 2 at the top are accessible. Any thoughts on this please, I've had the SD unit right out of the machine, theres no binding in the movement of the bottom plate. When the paper does land all the way down the fold is perfect.

    Any input would be appreciated.

    Thanks!
    A.

  2. #2
    Service Manager 1,000+ Posts
    C754e FS535 with SD unit

    habik's Avatar
    Join Date
    Apr 2010
    Posts
    2,015
    Rep Power
    59

    Re: C754e FS535 with SD unit

    Quote Originally Posted by copytechman View Post
    This thing is a stinker to see into, but the paper doesnt consistently fall all the way down or hangs on something when it drops causing a misalignment when it folds, all mylars look good, was considering replacing the set of 4 paddles at the bottom, I dont even think the set of 2 at the top are accessible. Any thoughts on this please, I've had the SD unit right out of the machine, theres no binding in the movement of the bottom plate. When the paper does land all the way down the fold is perfect.

    Any input would be appreciated.

    Thanks!
    A.
    Check the knife movement. We had few where the kinfe on occasion was protrusing out a bit.
    .OK Google! ... will I need Berrocca this morning?
    Firmwares HERE

  3. #3
    Master Of The Obvious 10,000+ Posts
    C754e FS535 with SD unit

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: C754e FS535 with SD unit

    This is off a SD510, but might help you. I've seen these registration plates get paper cuts in the small feature right where the paper comes into the folding tray. Maybe the picture will help. I've added sheet metal "guards" to a few of these saddle stitcher guides to avoid wear at that point.

    New Unaltered.JPGNew Armored.JPG

    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  4. #4
    Field Supervisor 500+ Posts B0265's Avatar
    Join Date
    Jan 2007
    Posts
    713
    Rep Power
    46

    Re: C754e FS535 with SD unit

    Check also the "grippers" and the solenoid in the stopper guide.

  5. #5
    Field Supervisor 500+ Posts
    C754e FS535 with SD unit

    copytechman's Avatar
    Join Date
    Nov 2008
    Location
    Barrie, Ontario
    Posts
    909
    Rep Power
    44

    Re: C754e FS535 with SD unit

    Quote Originally Posted by habik View Post
    Check the knife movement. We had few where the kinfe on occasion was protrusing out a bit.
    You would think it would know when the knife's at home? Can it overrun and not code out?

    Thanks!

    A.

  6. #6
    Field Supervisor 500+ Posts
    C754e FS535 with SD unit

    copytechman's Avatar
    Join Date
    Nov 2008
    Location
    Barrie, Ontario
    Posts
    909
    Rep Power
    44

    Re: C754e FS535 with SD unit

    Quote Originally Posted by blackcat4866 View Post
    This is off a SD510, but might help you. I've seen these registration plates get paper cuts in the small feature right where the paper comes into the folding tray. Maybe the picture will help. I've added sheet metal "guards" to a few of these saddle stitcher guides to avoid wear at that point.

    New Unaltered.JPGNew Armored.JPG

    =^..^=
    Your referring to the joggers inside the chute as it goes into where it lands on the bottom, dang those are hard to inspect, the customer did mention that they folded a lot with this particular machine. I'll have to have a second look at them.

    Thanks!

    A.

  7. #7
    Field Supervisor 500+ Posts
    C754e FS535 with SD unit

    copytechman's Avatar
    Join Date
    Nov 2008
    Location
    Barrie, Ontario
    Posts
    909
    Rep Power
    44

    Re: C754e FS535 with SD unit

    Quote Originally Posted by B0265 View Post
    Check also the "grippers" and the solenoid in the stopper guide.

    By grippers are you referring to the paddles that rotate around or the jogging plates? As for the solenoid in the stopper guide could you point out where that might be, I do have a parts manual and service manual so if i had a pn I could locate it easier... manuals can be easy to overlook things in.

    Regards!

    A.

    Edit: gotta love a theory manual that talks about a solenoid but doesnt show where it is! Found it though, its at the bottom on the assy that the paper lands on (and moves up and down) . Gonna have to have a look @ that one too. This is an SD512 btw.

    Regards!
    A.

  8. #8
    Master Of The Obvious 10,000+ Posts
    C754e FS535 with SD unit

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: C754e FS535 with SD unit

    This is the illustration I was looking for:

    SD-510 J7248.JPG

    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  9. #9
    Field Supervisor 500+ Posts
    C754e FS535 with SD unit

    copytechman's Avatar
    Join Date
    Nov 2008
    Location
    Barrie, Ontario
    Posts
    909
    Rep Power
    44

    Re: C754e FS535 with SD unit

    Quote Originally Posted by blackcat4866 View Post
    This is the illustration I was looking for:

    SD-510 J7248.JPG

    =^..^=
    Thanks! Not quite sure if thats similar to the sd512 or not but will check again regardless!

    A.

  10. #10
    Field Supervisor 500+ Posts
    C754e FS535 with SD unit

    copytechman's Avatar
    Join Date
    Nov 2008
    Location
    Barrie, Ontario
    Posts
    909
    Rep Power
    44

    Re: C754e FS535 with SD unit

    Quote Originally Posted by copytechman View Post
    Thanks! Not quite sure if thats similar to the sd512 or not but will check again regardless!

    A.
    Update:

    Turns out that the 2 paddle rollers weren't "synced" with the markers, at least it appears that way, don't know how they got out of sync but we'll see. Stay tuned.

    A.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here