I have a BH C224 that is locked on the Konica Minolta logo screen, does anyone have any suggestions? Does this work with the NVRAM reset works again?
I have a BH C224 that is locked on the Konica Minolta logo screen, does anyone have any suggestions? Does this work with the NVRAM reset works again?
You've probably tried this but first thing I would do is see if it will accept a firmware update USB.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Memory Dimms?
Firmwares HERE.OK Google! ... will I need Berrocca this morning?
reset tool should only be used for board replacement and a few other things. it was not designed the way half the guys use it here. what bar is it hangging. that will tell you what might be wrong. did you try it with the hdd unplugged
If you can , try with other SSD in your machine .
Bookmarks