Hi everyone,
Please assist on the above specified.
Thanks in advance and stay blessed.
Best of regards,
Ahmed.
Hi everyone,
Please assist on the above specified.
Thanks in advance and stay blessed.
Best of regards,
Ahmed.
PM me
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
To support the feature of "cancel life stop/eliminate life notice" ill bet
A0P00Y0-F000-GM6-31.exe
does not exist on SSD.
no gm6 at all.
1. Press the Utility/Counter key.
2. Touch [Meter Count] on the touchscreen.
3. Touch [Check Details] on the touchscreen.
4. Press Stop, 0, 0, Stop, 0, 1.
5. Press Stop, 0, C.
6. Touch [IU Life Stop Setting] on the touchscreen.
7. Touch [No Stop] on the touchscreen.
8. Touch [END] on the touchscreen.
9. Touch [Exit] on the touchscreen.
GC6-C5 is the minimum FW to allow the no life stop.
AFAIK it was added to base FW.
also, im in the US region so if that version exists i dont see it in the US.
Last edited by Synthohol; 07-09-2017 at 04:12 PM.
[QUOTE=Synthohol;569289]A0P00Y0-F000-GM6-31.exe
does not exist on SSD.
no gm6 at all.
1. Press the Utility/Counter key.
2. Touch [Meter Count] on the touchscreen.
3. Touch [Check Details] on the touchscreen.
4. Press Stop, 0, 0, Stop, 0, 1.
5. Press Stop, 0, C.
6. Touch [IU Life Stop Setting] on the touchscreen.
7. Touch [No Stop] on the touchscreen.
8. Touch [END] on the touchscreen.
9. Touch [Exit] on the touchscreen.
GC6-C5 is the minimum FW to allow the no life stop.
AFAIK it was added to base FW.
also, im in the US region so if that version exists i dont see it in the US.[/QUOT
Thank you for the info i will work on it and get back here with the result.
Best of regards,
Ahmed Chamumi.
Bookmarks